11
Disassembly and disposal
12
Maintenance
13
Technical data
8009200.11O1 | SICK
Subject to change without notice
LED indicator/fault pattern
Yellow LED lights up, no object
in the path of the beam
The sensor must be disposed of according to the applicable country-specific regula‐
tions. Efforts should be made during the disposal process to recycle the constituent
materials (particularly precious metals).
NOTE
Disposal of batteries, electric and electronic devices
•
According to international directives, batteries, accumulators and electrical or
electronic devices must not be disposed of in general waste.
•
The owner is obliged by law to return this devices at the end of their life to the
respective public collection points.
•
This symbol on the product, its package or in this document, indicates
that a product is subject to these regulations.
SICK sensors are maintenance-free.
We recommend doing the following regularly:
•
Clean the external lens surfaces
•
Check the screw connections and plug-in connections
No modifications may be made to devices.
Subject to change without notice. Specified product properties and technical data are
not written guarantees.
Table 10: Technical data
Sensing range
Sensing range max.
Light spot diameter/distance
Supply voltage U
B
Output current I
max.
DISASSEMBLY AND DISPOSAL
Cause
The beam of light of a photo‐
electric through-beam sensor
hits the receiver of another
(neighboring) photoelectric
through-beam sensor
WS/WE34-B / -V -R
0 ... 50 m
0 ... 60 m
Ø 700 mm (50
m)
DC 10 ... 30 V
100 mA
11
Measures
Swap the sender and receiver
arrangement at every sec‐
ond through-beam photoelec‐
tric sensor and ensure that
there is sufficient distance
between the through-beam
photoelectric sensors.
0 ... 50 m
0 ... 60 m
Ø 700 mm (50
m)
AC / DC 20 ...
250 V
1)
13