Fein WSB 8-115 Manual De Instrucciones página 18

3 41 01 048 06 4.book Seite 18 Donnerstag, 20. Juli 2006 2:18 14
EN
Hold the power tool by the insulated gripping sur-
faces only, when performing an operation where
the accessory could contact hidden wiring or its
own cord.
Beware of any concealed electric cables, gas or
water conduits;
Never lay the power tool down until the accessory
has come to a complete stop.
Do not carry the power tool at your side while the
motor is running.
Causes of kick-back and precautionary
measures for the operator.
Hold the power tool firmly and position your body
and arms optimally to withstand any kickback
forces. Always use the original auxiliary handle so
that kickback forces or the starting torque can be
mastered in the best possible way.
Never place your hand near the rotating acces-
sory.
Do not position your body in the area where the
power tool will move if kickback occurs.
Take special care when machining corners, sharp
edges, etc. Prevent the accessory from bouncing
off or tilting.
Do not attach a saw chain, wood-carving blade or
circular saw blade.
Additional safety instructions, particularly
for cutting operations.
Avoid jamming the cutting wheel or applying
excessive pressure. Do not attempt to make an
excessive depth of cut.
Do not position yourself in line with and behind the
rotating cutting wheel.
Switch the power tool off if the cutting wheel
blocks or if the cutting process is interrupted for
some reason. Hold the power tool motionless until
the cutting wheel has come to a complete stop.
Never attempt to remove the cutting wheel from
the cut while the wheel is still moving, otherwise
kickback may occur.