Place Of Installation; Installation Preparations; Removal Of Protective Film And Other Materials - Piron Marco Polo Serie Instrucciones

PLACE OF INSTALLATION

The oven must be installed in a closed and well-ventilated room (not outdoors).
Before putting it into position, check the overall dimensions and the exact position of the electric power and
water supply connections.
The oven should be installed below an extraction hood or provision should be made for the hot air and
smells coming out of the cooking chamber outlet to be conveyed outdoors.
The oven must be placed on a flat surface to prevent it from slipping and tipping over.
The oven should be installed on a site capable of supporting the weight of the equipment combined with its
maximum load. The weight is specified on the tag plate attached to the back of the oven itself.
Make sure the back of the oven is easily accessible for connection to the electric power and water supply
and to allow maintenance work to be carried out.
The oven is not suitable for built-in installation and a space of 15 cm must be left around it.
The oven should not be placed close to sources of heat, fryers or other hot items; if unavoidable, the
following safety distances must be maintained: 50 cm above and to the sides of the oven and 70 cm from
the back.
Do not, for any reason, place the oven close to flammable materials or containers (such as walls, furniture,
partitions, gas bottles); it could cause a fire hazard. If unavoidable, cover flammable parts with non-
flammable thermal insulation material, in strict compliance with fire prevention regulations.
If the oven is to be installed above proofers,
stainless steel tables or other ovens, shelves that
are above the user's line of sight should not be
used. For safety reasons, after installing the oven
apply the "Burn
positioning it at a height of 1600 mm from the
ground. (see image to the side)

INSTALLATION PREPARATIONS

Remove the external packaging (wooden crate and/or cardboard box) and dispose of it in accordance with
the regulations in force in the country of installation.

REMOVAL OF PROTECTIVE FILM AND OTHER MATERIALS

Remove all of the protective film from the oven,
inside and out (see illustration on the right)
Remove all of the documents and any plastic
bags from inside the oven.
Hazard" sticker provided,
E n g l i s h | 34