Non-Routine Maintenance; Replacing The Light; Replacing And Cleaning The Cooling Filter; How To Change The Cooking Chamber Gasket - Piron Marco Polo Serie Instrucciones

NON-ROUTINE MAINTENANCE

The equipment should be checked on a regular basis (at least once a year) by specialised and authorised
technical personnel.
Any maintenance, installation or repair must be performed by qualified and authorised personnel; please
contact the Service Centre. Before performing any work, disconnect the equipment from the electric power
and water supply and wait for it to cool down.
Before moving the equipment, check that the electric and water connections (power cords, water feed pipe
and outlets) have been disconnected correctly.
If the equipment is installed on a structure equipped with wheels, check that no power cords, piping or other
such items are damaged whilst it is being moved. Make sure the safety lock has been applied to prevent it
from moving whilst work is being performed. Avoid positioning the oven close to sources of heat (e.g. fryers,
etc).
Once the work has been completed and the equipment has been returned to its original position, check that
the electric power and water connections have been connected in compliance with the applicable regulations.

REPLACING THE LIGHT

WARNING: adhere strictly to the following procedure to
prevent causing electric shocks or harm to people:
•
Disconnect the oven from the electric power supply and
allow it to cool down.
•
Remove the side racks that support the pans.
•
Unscrew the glass cover "A", being careful not to damage
the gasket "C". Replace the bulb "B" with another one of
the same type.
•
Screw the glass cover "A" back on, being careful not to
damage the gasket "C".
•
Replace the side racks and make sure they are securely
fastened.
If the glass cover is damaged or broken, do not use the oven until the cover has been replaced
(contact the Service Centre).

REPLACING AND CLEANING THE COOLING FILTER

WARNING: adhere strictly to the following procedure to
prevent causing electric shocks or harm to people:
• Disconnect the oven from the electric power supply
and allow it to cool down.
• Unscrew the screws fastening the racks and replace or
clean the filter.
• Once the work has been completed, reassemble
everything.

How to change the cooking chamber gasket

If the gasket fitted around the opening to the cooking chamber is cracked it should be replaced.
For safety reasons, the gasket must be replaced by technical personnel from the Authorised Service
Centre.
E n g l i s h | 59