How To Start The Cooking Process; Warm-Up; Thermostat Indicator - Piron Marco Polo Serie Instrucciones

How to start the cooking process

Close the oven door.
START/STOP
Touch the "
The indicator light of the

Warm-up

Foreword:
Automatic start-up of the warm-up stage can be annulled. See SETTINGS MENU PrH chapter.
Manual interruption of the warm-up cycle
The warm-up cycle can be interrupted at any moment. Press the P/M key until PrH
the display. Perform the operations described in the ACTIONS section.
Automatic termination of the warm-up cycle
An acoustic signal will be heard when the temperature in the oven has reached 30°C more than the set
cooking temperature value. PrH End will alternate on the display.
Actions
Open the door and place the food in the oven.
Depending on the values selected, cooking will begin automatically as soon as the door is closed.
Notes:
- The warm-up temperature does not exceed the maximum value of 270°C (518°F)
- To obtain a better result, only place food in the oven when it has completely warmed up.
Warming up is always advisable as it improves the performance of the oven (with the
exception of certain cases when cooking must start with a "cold" oven).

THERMOSTAT INDICATOR

When the lights in the symbol are red, it means that the oven heating elements are on. When the
indicator goes out or is green, it means that the heating elements are off or the set temperature has
been reached in the oven.
" key.
icon comes on (green)
E n g l i s h | 47
(Zone D)
End appears on