Set-Up - SICK LCU-P Manual De Instrucciones

Chapter 7
Programm access
Select Function
100
Change Set.-up Define User Modes
ENTER
Language
S1
English French
S2 Measurement Units
Inches
S3 Receiver 1/2
Type 4/none Type 4/Type 4
Type 2/none Type 2/Type 2
S4 Receiver 2 Restart
With Receiver
S5 Reset Switch
Press and release
S6 Alternate Restart Break
Alternate Restart - no
S7 Restart Timer Break
Restart timer
Break - none
Cycle Contact Time Break
S8
Cycle I/O limited
S9 Sensor Test
PSSD not tested
S10
346
Programming
7. 2

Set-up

Run Modes
ESC
German
Millimetres
Type 4/Type 2
Type 2/Type 4
Restart Interlock
Latched
Alternate Restart - yes
Restart timer
Break - 28 s
Cycle I/O unlimited
PSSD tested on
I/O Break
8 008 364/NB 86/25-04-00 © SICK AG • Safety Systems • Germany • All rights reserved
S10 System Test
Test Contact N.C.
S11 Relay/Monitor
Relay Monitor - yes
S12 Auxiliary Inputs
No muting Mute = A1 & A2
S13 Muted Inputs
No muted receivers
Both Receivers
S14 Muting Timer
No muting timer
S15 New Access Code
No
S16
1234567890<>#
S17
Confirm Set-up
Display all
basic settings
with
100 Select Function
Change Set-up Define User Mode
ESC
S1 U1, (2), (3)
000 Keypad Enabled
Press Selector
LCU Ready to Operate
Operating instructions
S9
Test Contact N.O.
Relay Monitor - no
Mute = A1 & A2
or B1 & B2
Receiver 1 Receiver 2
Select time with
0 ... 300 s
Mut. limit s
Yes
Define 3-digit code
number. Confirm by
* * *
selecting # symbol
and pressing ENTER.
ENTER (save)
Run Mode
R1
LCU-P