TEFAL QB319838 Manual De Instrucciones página 139

• To stop the appliance, turn the selector (a1) to "0" and then unplug your
appliance.
Overloading protection:
Your kitchen appliance is equipped with a microprocessor that controls
and analyses the power when operating. If your appliance is overloaded,
it will adapt by reducing its speed or switching off by itself. If it switches
off, set the speed selection button (a1) to position "0", unplug your
appliance, and remove some of the ingredients. Allow your appliance to
rest for a few minutes. You can then plug in and restart your appliance
by turning the speed selection button (a1) to the speed required for the
recipe.
1 - MIXING/KNEADING/BEATING/EMULSIFYING/
WHISKING
ACCESSORIES USED:
– Bowl (b1)
– Lid (b2)
– Kneader (c1) or mixer (c2) or balloon whisk (c3)
1.1 ASSEMBLING THE BOWL ACCESSORIES (DIAGRAMS 1):
• Turn the button (a3) to unlock the multifunctional head (a4) and lift it
until it stops.
• Lock the bowl (b1) (anti-clockwise) on the appliance and put in the
ingredients.
• Insert the desired accessory (c) into the outlet (a2.1), until it is clipped
in place.
• Place the multi-function head (a4) to the horizontal position: turn the
button (a3) and manually lower the multi-function head (a4) until it
locks (the button (a3) returns to its initial position).
• Slide the lid (b2) over the bowl (b1).
Please note: it is not necessary to use the lid. It limits the risk of splashing.
• Make sure that the cover (a6) is correctly in place on the high-speed
outlet (a5).
1.2 USAGE:
• Start by turning the selector (a1) to the desired speed according to the
recipe.
EN
139