Technical Data
Cross-line Laser
Max. working range
Aperture angle
Levelling Accuracy
Self-levelling range, typically
Levelling duration, typically
Laser class
Laser type
Tripod mount
Batteries
Operating life time, approx.
Weight according to EPTA-Procedure 01/2003
Assembly
Inserting/Replacing the Battery (see figure A)
Alkali-manganese batteries are recommended for the measuring tool.
– Remove the protective rubber sleeve 3.
– Open the battery compartment 6.
– When inserting batteries, pay attention to the correct polarity accord-
ing to the representation on the inside of the battery compartment.
– Always replace all batteries at the same time. Only use batteries from
one brand and with the identical capacity.
– Close the battery compartment and remount the protective rubber
sleeve on the measuring tool.
Remove the batteries from the measuring tool when not
using it for extended periods. When storing for extended periods,
the batteries can corrode and discharge themselves.
18 | English
58-iLMXL
30 m
120°
± 0.4 mm/m
≤ 3 s
635 nm, <1 mW
1/4" x 20
3 x 1.5 V LR6 (AA)
20 h
0.9 kg
1 609 929 T56 • 24.2.09
± 4°
2M