Installing The Camera; Disassembling The Device - Ezviz C4S Manual Del Usuario

Installing the Camera

Make sure the wall is strong enough to withstand three times the weight of the
camera and the mounting.
Do not tear off the protetive film on the camera untill the installation is finished.
1

Disassembling the Device

According to the pictures below, remove black decorative parts, front cover
and inner cover in order and insert the micro SD card in the card slot.
1 Find the OPEN mark on the trim
ring. Lift the lock near the mark
to take off the trim ring.
Remove the inner cover.
3
2 Loosen the three screws on the
front cover using Allen wrench and
take off the front cover.
Insert the microSD card into the
4
card slot if you want to record the
event video inside the microSD
card. (Optional)
5