Coway APM-1010DH Manual Del Usuario página 19

Cleaning the water tank (daily)
4
Dry the water tank completely in a shady location to remove all
moisture before installing it.
To operate in humidifying air purification mode: Remove any
-
moisture from outside the water tank, fill up the water tank
with water and install the water tank.
To operate in air purification mode: Remove any moisture
-
from outside and inside the water tank and install the water
tank.
Cleaning the water tray (daily)
1
Separate the water tank from the product and separate the water tray from the side of the product by
pulling it.
When you remove the water
-
tray as shown by the figure,
take care because there may
be residual water in the hole of
the catch.
2 Carefully separate the humidification filter from the water tray.
When you separate the humidification filter, some water
-
absorbed by the filter can be extracted. Please take care of the
water.
Soak the humidification filter in warm water (40
least 20 minutes and softly wash it with a cleaning brush under
flowing water.
The period and intensity of the scale accumulation at the front of
-
the humidification filter may differ depending on the TDS of the
water. If the filter is whitened by the accumulated scale, wash it
under flowing water.
℃
or lower) for at
17
18