Coway APM-1010DH Manual Del Usuario página 24

NATURAL vAPORIzATION HUmIDIFIcATION
Operating mechanism
The humidification method adopted by this product
is a natural vaporization humidification type. The
humidification part consists of three parts, the water tank,
the water tray and the humidification filter. The water tank
supplies water to the water tray and the humidification
filter installed in the water tray absorbs water. The dry air
that is inhaled into the product is changed to humidified
air as it passes through the holes of the humidification filter
and the humid air humidifies the air in the room.
As the warm, dry air passes the humidification filter, it
-
acquires moisture and loses heat, and the airflow from
the product is colder than it was, you may feel that the air is cooler depending on the size or temperature of
the room.
The amount of moisture supplied by a natural vaporization humidification type varies depending on the
-
surrounding temperature or humidity. Therefore, if the humidity is high or the temperature is low, the
amount of moisture supplied by the humidification function may be low.
Advantages
In the case of an ultrasonic type humidifier, since the water particles that are sprayed into the air are big and
heavy, only the area around the humidifier is humidified and the area around the humidifier becomes wet after
operating for a long time. However, since the natural vaporization humidification vaporizes water in the same
way that water is vaporized naturally and the water particles are small and light, not only are respiratory organs
not irritated and the surrounding area does not become wet, but also the entire area is humidified evenly.
Coverage of the ideal temperature/humidity
This product is designed for a 33 square meter area. If this product is used in a large space, the humidification
effect may not be satisfactory. (To humidify a large area, set the airflow speed to step 3 or higher in humidifying
air purification mode.)
Dry air
Humid air