Description Of The Parts; About The Battery; Battery Loading - Sigma EF-610 DG SUPER Instrucciones

DESCRIPTION OF THE PARTS

1.Flash Head
EXTERNAL 4.Bounce Angle; Right and Left
PARTS 6.Swivel Lock and Release Button; Right and Left
9.Shoe Ring
13.MODE Button
CONTROLS
16. - Decrement Button
19.LIGHT Button
CAMERA MODELS AND FUNCTIONS
This flash can be used with cameras, which are given below.
Digital SLR, F6, F5, F4 Series, F3 Series(*), F100, F90X/N90S Series, F90/N90 Series, F80 Series,
F75/N75, F70D/N70, U/F65/N65, F60D/N60, F55/N55, F50D/N50, F-801S/N8008S, F-801/N8008,
F601M, F-601/N6006, F501/N2020, F401X, F401S/N4004S, F-401/N4004, F-301, N2000, FA, FE10,
FE-2, FG, FM10, New FM2, FM3, Nikonos V(*), Pronea 600i
(*) It is necessary to use adapter for connection.
This instruction book is used for the following lens types. (Please check your lens.)
With Built-in CPU Nikon Lenses
Without Built-in CPU Nikon Lenses

ABOUT THE BATTERY

This flash unit uses four "AA" type Alkaline dry cell batteries or Ni-Cad, Ni-MH rechargeable batteries.
Manganese batteries can also be used but as they have a shorter life than Alkaline batteries, we do
not recommend using them. Please replace batteries if it takes more than 30seconds to light the
Ready Lamp.
To assure proper electrical contact, clean the battery terminals before installing the batteries.
◆
NiCad batteries do not have standardized contacts. If you use NiCad batteries, please confirm that
◆
the battery contacts touch the battery compartment properly.
To prevent battery explosion, leakage or overheating, use four new AA batteries of the same type
◆
and brand. Do not mix the type or new and used batteries.
Do not disassemble or short-circuit the batteries, or expose them fire or water; they may explode.
◆
Do not recharge the batteries other than Ni-Cd or Ni-MH rechargeable batteries.
When the flash will not be used for an extended period of time, remove the batteries from the flash
◆
to avoid the possibility of damage from leakage.
Battery performance decreases at low temperatures. Keep batteries insulated when using the flash in cold
◆
weather.
As with any flash, it is recommended you carry spare batteries when on a long trip or when
◆
photographing outdoors in cold weather.

BATTERY LOADING

1. Be sure to set the Power Switch to the off position
then slide the battery cover in the direction of the
arrow to open.
2. Insert four AA size batteries into the battery
chamber. Be sure the + and – ends of the batteries
are aligned according to the diagram in the
chamber.
15
2.AF Auxiliary Light
5.Bounce Lock and Release Button; Up and Down
10.Shoe 11.Catch Light Panel
14.SEL SELECT Button
17.ZOOM Button
20.Ready Light
D Type Lenses, G Type Lenses, IX Nikor Lenses, Except D
type AF lens (does not include F3AF), Ai-P type lens
Ai-S, Ai, Series E lens
3.Bounce Angle; Up and Down
7.LCD Panel
12.Wide Panel
15. + Increment Button
18.TEST Button
21.Power Switch
8.Battery Cover