Liquid supplies can be injected directly into the
cups by a customer-supplied external chemical
supply system. Five hose strain reliefs on top of
the supply dispenser facilitate connection to an
external supply system. A terminal strip inside
a compartment on the back of the control
module, provides connection points for
external supply signals.
A red emergency stop button is located on the
upper right-hand corner of the control panel.
Delivery Inspection
Upon delivery, visually inspect crate,
protective cover, and unit for any visible
shipping damage. If the crate, protective cover,
or unit are damaged or signs of possible
damage are evident, have the carrier note the
condition on the shipping papers before the
shipping receipt is signed, or advise the carrier
of the condition as soon as it is discovered.
Remove the crate and protective cover as soon
after delivery as possible. If any damage is
discovered upon removal of the crate and/or
protective cover, advise the carrier and file a
written claim immediately.
Customer Service
If literature or replacement parts are required,
contact the source from whom the washer-
extractor was purchased or contact Alliance
Laundry Systems LLC at (920) 748-3950 for
the name of the nearest authorized parts
distributor. A parts manual may be ordered by
returning the postage-paid card provided with
each washer-extractor.
F232084
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
For technical assistance, contact your local
distributor or call any of the following
numbers:
(850) 718-1025
(850) 718-1026
Marianna, Florida
(920) 748-3121
Ripon, Wisconsin
www.comlaundry.com
A record of each washer-extractor is on file
with the manufacturer. The serial number decal
is located on the left side of the control module
at the rear of the machine. Figure 1 shows the
location of the serial number on the decal.
Always provide the machine's serial number
and model number when ordering parts or
when seeking technical assistance.
11