Turning Off - Movement POWERHILL Manual De Instrucciones

OPERATION
1. TURNING ON: Press any button or move the equipment and the electronics
module will turn on.
2. As soon as the electronic module detects the movement of the equipment, it will go
into normal mode.
3. SLEEP MODE: Press PROGRAM (BUTTON 11) to enter different exercise modes
(Normal, Custom Interval, Distance, Calories and Heart Rate).
4. Press TARGET TIME (BUTTON 10) to set the time you will exercise. To end the
programming and start the exercise press the START key (BUTTON 14).
5. If the electronic module does not detect any signal of movement in the equipment,
or if no key is pressed, it will enter inactive mode after 90 seconds.
6. ENDING THE EXERCISE: After finishing the settings mentioned above
(NUMBER 3), the electronic module will show each exercise mode on the display.
The electronic module will return to normal mode if the user steps heavily on the
equipment even though the exercise has ended.
7. TURNING OFF: The electronics module will turn off if it does not detect any
movement or key press within 90 seconds after standby mode.
4. INCREASE OR DECREASE KEY
8 9
36
11
14
10
14