LUCCI Air AIRFUSION BREEZE Manual De Instrucciones página 5

Breeze Pedestal Fan Installation Instructions
1. Loosen the base locking screw (10), spring washer (9) and flat washer (8) from the standing pipe. Fig. 1
2. Attach the standing pipe (5) onto the standing base (6). Install the base locking screw (10) through the spring washer
(9), flat washer (8), heavy base (7) and then tighten the base locking screw (10) to secure the standing pipe (5). Fig.1
3. Loosen the height adjustment ring (4) and pull out the height adjustment pipe (2) to the desired height.
Tighten the height adjustment ring (4) firmly. Fig. 1
4. Place the fan head assembly (1) onto the top of the height adjustment pipe (2). Secure it by tigntening the fixed knob
(12). Fig. 1
5. Loosen the tilt adjustment knob (11) and adjust the fan head upwards or downwards to your desired tilt angle.
Secure the fan head tilt angle by tightening the tilt adjustment knob (11) firmly. Fig. 1
6. Insert the plug into the mains socket outlet and ensure it is fully plugged in.
FAN SPEED CONTROL (Fig.2)
The fan has 3 different speeds which are controlled by the speed control switch.
III
- High speed
II
- Medium speed
I
- Low speed
0
- OFF
FAN SWING CONTROL (Fig.3)
The oscillation of the fan is controlled by the Oscillation knob.
1. Push down the oscillation knob, the fan will oscillate from left to right.
2. Pull up the oscillation knob, the fan will stop oscillating.
4 | P a g e
ASSEMBLING THE FAN
USING YOUR FAN
Fig. 2
Fig. 3