Installation Steps; Care And Cleaning - AVS Bugflector Instrucciones De Instalación

Installation Steps

Reposition the hood shield with the tabs sliding between the
hood and rubber seal and align with holes.
3
Tighten all (4) screws until snug to secure
hood shield to hood.
5
NOTE: DO NOT OVER TIGHTEN
7

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost pride in our
products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in
terms of fit, durability, finish and ease of installation.
™ Auto Ventshade
NOTE: Actual application may vary slightly from illustrations.
Close Hood.
800-241-7219 • Visit us at lundinternational.com
© 2012 Lund International, Inc. All rights reserved.
, the Auto Ventshade logo and the AVS
TM TM
4
Turn both of the hood bumpers counter clock-
6
Apply bump ons to surface of hood
8
Lund International
logo are trademarks of Lund International, Inc.
TM
Page 2 of 2
Install (4) screws with washers.
wise 1 1/2 turns.
hood shield
seal
washer
screw