Charging - Amibot Spirit Manual De Instrucciones

EN
Operation

Charging

Assembling the home base (Spirit Premium version)
0.5 m
0.5 m
1.5 m
To plug in the home base, open the cover under the robot and plug
in the power cable. Wind the cable around integrated cable tidy
and thread through the recess. Then put the cover back on again.
Place the home base on a level surface next to a wall, at a right angle
to the floor. Keep a distance of at least 1.5 m in front of the base and
0.5 m at either side.
NOTE: When your AMIBOT Spirit Premium robot is on its home base, make sure that
your robot is switched on and the home base power light is on.
Assembling the auto-empty station (Spirit Premium Station
version)
0.5 m 0.5 m
1.5 m
13