Amibot Spirit Manual De Instrucciones página 33

Troubleshooting
"Please scrub the
front sensor, and
05
restart me from a
new location"
"Please scrub
the right-hand
06 sensor, and restart
me from a new
location"
"Please scrub the
radar housing on
07 top, and restart
me from a new
location"
"Please check if the
bumper has been
08
blocked in some
way"
"Master, please
09 clean the dustbin
and filters"
"Dust container
has been removed,
10 please clean the
container and
filter"
"Please check if
my wheels have
11
become blocked
somewhere"
The bumper's sensors
are dirty.
The wall sensor is dirty.
The laser module is
dirty.
Problem with the
bumper. The bumper
is frozen.
The dustbin is full or
the filters are dirty.
Error n.09 means that
the dustbin is not
correctly inserted.
Problem with the
wheels and/or the
castor.
31
Clean the bumper's
sensors using a soft cloth.
Clean the wall sensor using
a soft cloth and place the
robot somewhere else.
Check the laser and clean
it thoroughly. Be sure
to remove any dust that
could prevent it from
working, using a soft cloth.
Check the bumper
and place the robot
somewhere else.
Empty the dustbin and
clean the filters (see the
Maintenance section).
Insert the dustbin
correctly.
Check the wheels and
the castor and remove
any elements likely to be
blocking them.
EN