6.7
SELECTING THE CUSTOM MEASUREMENT UNITS
You can define up to three custom units per user. This allows you to perform calculations
directly from weighing detection (i.e. volume, paper grammage g/m3). The custom weight unit
can be recalled in all fields and menus where the units can be selected.
In the setup menu, select the "Setup" function and then "Custom units setup".
© Adam Equipment 2018
On the "Custom units setup" screen, you can
select one of the three units K1, K2, K3 available
to personalise it.
After the selection, enter the following data:
Name: enter the unit identifier (max 15
characters).
Symbol: enter the symbol you want to assign
to
the
unit
characters). The weight units g, kg, lb and so
on are not allowed.
Multiplier factor: enter the multiplicative
factor with which the weighing result has to be
calculated
Decimal point position: enter the position of
the decimal point with which you want to
display the result (i.e. entering 1, the value
123,123 will be displayed as follows: 12312,3)
28
of
measurement
(max.
3