Formulation" Function - Adam Equipment EQUINOX EAB Manual De Usuario

7.10 "FORMULATION" FUNCTION

This function allows you to prepare a compound by dosing a set of components in manual
mode "Simple formulation" or by calling a formula with ingredients and tolerances previously
entered in the formulations database.
To access the function from the "Functions" menu, tap the "formulation" icon.
© Adam Equipment 2018
Simple formulation:
This mode allows you to carry out a series
of consecutive weights and finally get the
total weight of the dosed components and
the relative list with the value of the
individual weights.
Tapping the "Simple formulation" button
immediately displays the measurement
screen.
 Load any container and run the tare.
Or, if necessary, reset the indication
with the "0" key.
 Now dose the first component and
tap the "Ok" key to confirm the
capture.
 Then repeat the operation for all the
components of the formulation.
 To finish the dosing operation of the
components, tap the "End" key.
67