Statistics" Function - Adam Equipment EQUINOX EAB Manual De Usuario

7.6

"STATISTICS" FUNCTION

This function allows you to perform weighing statistics in simple mode, without defining the
nominal weight and tolerance value, or, using database statistics, you can define the relative
nominal weight and tolerance values. At the end of the procedures in both cases, it is possible
to print the statistical result of the weights.
To access the function from the functions menu, tap the "Statistics" icon.
© Adam Equipment 2018
Select the mode:
Simple statistics: by selecting the simple
function, you can perform the statistics up
to 500 consecutive weights.
Tap the "Simple Statistics" button and
immediately the screen will be activated to
perform the weighing.
Database: by selecting the statistical mode
from the database, you can store and then
recall a custom statistics method.
By tapping the "database" key, you can
create a custom database to determine the
different density types.
Tap the "New" key and enter the name of
the new record to be stored.
Description: enter a description of the

item.
 Nominal weight: enter the nominal
weight value and select the desired
unit of measurement.
 Enter values for tolerance check
(Optional Data).
 T2+ : 2nd positive tolerance
 T2- : 2nd negative tolerance
 T1+ : 1st positive tolerance
 T1- : 1st negative tolerance
After entering all required data, tap the
"Save" key to save the new record. Before
performing the save, a check of the entered
data is performed. An error will be reported
to make the necessary corrections if
necessary. After, press the save key.
56