Electromagnetic Emissions; Electromagnetic Compatibility (Emc) User Information - Integra Pro DLX UltraLite 003285NTSC Instrucciones De Uso

Electromagnetic Compatibility
The information contained in this section (such as separation distances) is specifically written with regard to the
DLX UltraLite® Pro Camera System. The numbers provided will not guarantee faultless operation but should provide
reasonable assurance of such. This information may not be applicable to other medical electrical equipment; older
equipment may be particularly susceptible to interference.
General Notes:
Medical electrical equipment requires special precautions regarding electromagnetic compatibility (EMC) and needs to be
installed and put into service according to the EMC information provided in this document and the remainder of the instructions
to use this device.
Portable and mobile RF communications equipment can affect medical electrical equipment.
Cables and accessories not specified within the instructions for use are not authorized. Using other cables and/or accessories
may adversely impact safety, performance and electromagnetic compatibility (increased emissions and decreased immunity).
Care should be taken if the equipment is used adjacent to or stacked with other equipment; if adjacent or stacked use is
inevitable, the equipment should be observed to verify normal operation in the configuration in which it will be used.

Electromagnetic Emissions

This equipment is intended for use in the electromagnetic environment specified below.
The user of this equipment should assure that it is used in such an environment.
Emissions
RF emissions (CISPR 11)
CISPR Emissions Classification
Harmonic emissions (IEC 61000-3-2)
Voltage fluctuations/flicker (IEC 61000-3-3) Complies
Compliance according to
Group 1
Class B
Class A
Electromagnetic environment
The equipment uses RF energy only for its
internal function. Therefore, its RF emissions
are very low and are not likely to cause any
interference in nearby electrical equipment.
The equipment is suitable for use in
all establishments including domestic
establishments and those directly connected to
the public low-voltage power supply network
that supplies buildings used for domestic
purposes.
11