Charging Times; Malfunctions - Porsche Mobile Charger Connect Manual De Instrucciones

Charging Times

Charging Times
DE
The charging duration can vary depending on the
EN
following factors:
FR
– Electrical socket used (household electrical
outlet or industrial electrical outlet)
IT
– Country-specific mains voltage and electric
ES current
– Settings for limiting the charging current on
PT
the charger
NL – Fluctuations in the mains voltage
– Ambient temperature of vehicle and charger.
SV
Charging times may be longer if the temperature
is at the limit ranges of the permitted ambient
FI
temperature.
f Refer to chapter "Technical Data" on page 39.
DA
– Temperature of the high-voltage battery and
NO
control unit
EL
– Passenger compartment precooling/heating
activated
CZ
– Current-carrying capacity of the power plug and
HU
vehicle plug
PL
Information
HR
Due to different mains supply systems in the various
SR countries, various cable versions are available. This
may result in the full charging power not being
SK
available. Further information is available from your
Porsche partner.
SL
ET
LT
LV
RO
BG
MK
34

Malfunctions

Fig. 9: Display in the event of malfunctions
A Status LEDs light up red
B Error message and cause
C Remedial action
In the event of faults or malfunctions, the charger
shows a corresponding message on the display. The
status LEDs and the Power button light up red. The
message shows details of the error, information
about the cause and a remedial measure.
e Follow the instructions provided for the remedial
measure.