Installation Steps
Set the hood shield in place, sliding outer tabs UNDER the hood
3
Insert (2) fasteners through the holes in the seal and
hood shield and into the holes in hood.
hood seal
5
Care and Cleaning
•
Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost
pride in our products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your
product is top quality in terms of fit, durability, finish and ease of installation.
™
Auto Ventshade
NOTE: Actual application may vary slightly from illustrations.
seals.
hood shield
Lund International, Ventshade Accessories Division
655 Raco Drive, Lawrenceville, GA 30045
800-241-7219 • Fax 770-339-5839 • Visit us at lundinternational.com
© 2005 Lund International, Inc. All rights reserved.
, the Auto Ventshade
logo and the AVS
TM
TM
Using a phillips screwdriver install (2) screws with (2)
4
Install bump ons at pre-cleaned locations on the
6
logo are trademarks of Lund International, Inc.
TM
Page 2 of 2
washers through the hood inserts.
square hole
hood
hood insert
hood shield
grommet
screw
DO NOT OVER TIGHTEN
painted hood/fender surface.