Starting Therapy - smith&nephew 66801280 Manual Del Usuario

Home screen (Intermittent therapy mode shown)
Therapy set point
Therapy set point – the prescribed therapy set by your healthcare provider.
The device will alternate between the therapy set points for the associated
cycle times until therapy is paused or turned off.
Cycle times – the amount of time the therapy set point will be delivered.

Starting therapy

Before starting therapy place the device and tubing in a location that is below
the level of the wound and is away from any direct sources of heat.
Press the Start/Pause Therapy
As the device begins delivering therapy,
it will perform a leak check to determine
if the system is properly sealed.
When therapy is turned on:
1. The status indicator illuminates green.
2. The therapy indicator at the top of
the screen rotates orange.
3. The prescribed therapy set point
displays on the screen.
4. The display reads "Delivering
Therapy".
button below the touchscreen to start therapy.
(Continuous)
17
EN
Cycle times
(Intermittent)