Pole/Bed Clamp - smith&nephew 66801280 Manual Del Usuario

EN
IV pole/bed clamp
Attach clamp to IV pole:
1. Twist knob to open clamp.
2. Align IV pole in center groove of clamp.
3. Twist knob to close clamp until firmly
seated.
Attach clamp to bed board:
1. Twist knob to open clamp.
2. Place clamp over bed board.
3. Twist knob to close clamp until firmly
seated.
Place device in clamp:
1. The clamp comes equipped with a holder
for the carry straps. To utilize, remove
carry straps from device and attach them
to the carry strap holder on side of clamp
(optional).
2. Align device attachment knobs with
clamp attachment recesses.
3. Push device gently into clamp attachment
recesses. The clamp's orange clips will
open during installation.
4. Secure device in the clamp by pressing
down on the orange clamp clips to close.
Remove device from clamp:
1. Lift orange clamp clips.
2. Gently pull device from clamp attachment
recesses.
Open
38
Close
Clamp
clips