Maintenance Safety - Cross Tools CPG 5500 NEV Instrucciones Para El Manejo

Translation of the original operating instructions
3. Avoid unintentional start-up. Make sure that, the motorised device is switched off
before you lift it or carry it.
4. Clear away the adjustment tools or wrenches before you switch the motorised de-
vice on.If a tool or a wrench is left in a rotating part of the device, it can cause injuries.
5. Wear suitable clothes.Do not wear loose clothes or jewellery. Keep hair, clothes and
gloves away from moving parts.Loose clothes, jewellery or long hair can get caught in
moving parts.
4.4. Safety when using combustion engines
1. NEVER operate the machine indoors or in closed areas unless the exhaust gases are re-
moved. Carbon monoxide in the exhaust gases is poisonous and can cause unconscious-
ness and death.
2. Do not smoke or work in the immediate vicinity of the machine.
3. Check the fuel lines and the tank for leaks and cracks at regular intervals.
4. Do not refuel when the machine is switched on or still hot.
5. Do not refuel near sparks, open fire or a smoking person -
Risk of explosion!
6. Never refuel a petrol or diesel engine in a room without sufficient ventilation. Fuel vapours
are highly inflammable and poisonous.
7. Do not overfill the tank and avoid spilling fuel when refuelling. If fuel spills, make sure that
everything is dry before you start the engine.
8. Make sure that the tank cap has been correctly and firmly closed after refuelling.
9. Store the fuel in permitted containers only.
10. A few parts of the combustion engine become very hot and can cause burns. Always
be careful and observe the warning stickers on the device.
4.5.

Maintenance safety

Regular maintenance and gentle care reduces the risk of possible malfunctions and contrib-
utes to lengthening the service life of your device.
1. Make sure that repairs to the engine and machine are carried out by qualified personnel.
2. Ensure that the engine switch is set to "OFF" before the safety equipment is dismantled or
shifted.
3. Always keep the machine clean and make sure that the stickers are legible. They contain
important operating instructions and warn against risk. Replace the missing and illegible
stickers.
4. Do not use petrol or inflammable solutions to clean the machine. The fumes of the fuel or
solutions can explode.
5. Always store the machine properly. It must be placed in a clean and dry place, which is
inaccessible to children.
6. Danger to life! For avoiding an electric shock, the device is secured using circuit break-
ers, which are specially designed for this device.When replacing these switches, an iden-
tical switch must be used to prevent an electric shock.
4.6. Intended use of CPG 5500 NEV
The generator is intended for operating conventional electrical consumers such as chains of
lights, electric service tools (drilling machines, electrical chain saws, compressors).
Electronic devices such as computers, TV units etc. must not be operated using a generator.
In case of a doubt, contact the manufacturer of your device.
A qualified electrician must be consulted in advance for connecting the generator to
stationary equipment such as heaters, household supply, air conditioners or for pow-
er supply to caravans. The critical point of an inductive consumer is the power con-
sumption during switch-on. The power consumption can be up to 3 times the rated
power. This must be taken into consideration at all times.
6
25