Identification Data - Zhermack QUASAR Manual Del Usuario

MAINTENANCE AND USE MANUAL
• the main switch (1) feeds power to the machine;
• the joystick (3) for the handling of the working surface: controls lift, fall and rotation on the central
axle of the work to weld.
• the start switch (7) operates the infrared beam lamp, starting the welding cycle;
• the reset switch (8) switches off the infra-red beam lamp, ending the welding cycle;
• the power control (10) must be brought back to zero before starting a new welding cycle;
• two safety micro-switches detect the position of the protecting screen (5) and of the mechanical
pointer (6) avoiding starting or stopping of the welding cycle if their positions are wrong.
The machine described in this manual has an ID platelet giving information about both the machine
and the manufacturer:
A
Zhermack S.p.A. - via Bovazecchino, 100
45021 Badia Polesine (RO) Italy - Tel. +39 0425 597 611
B
D
230V~50/60Hz 1200W
the machines has been built in compliance with the EC directives listed in the enclosed "EC
declaration of conformity". When requesting spare parts, information or assistance from your
authorised Servicing Centre always quote the data on the ID plate.
Should the ID plate deteriorate and become illegible, even partially, order a replacement plate from
the manufacturer: remember to quote the relevant data.
Do not remove and/or damage the plate as you must be able to read the data at all
times.
QUASAR/QUASAR PLUS
EN
C306800 - quasar
SN:20000000
Operating summary

IDENTIFICATION DATA

A. Name and address of manufacturer
B. Machine code and model
C
C. Serial number
D. power supply information
3.2.2
3.3
121 of 296