STARTING UP THE MACHINE
6.5
1
Figure
2
Figure
3
Figure
9
4
Figure
130 of 296
Fig. 1: place the welder evenly on the worktop (see
paragraph 4.2.1).
Fig. 2: Use the side handles (11) to raise the
protective screen (5) and gain access to the worktop.
Fig. 3: Before doing any welding and before
switching on the welder position the refractory platform
(12) on the surface working plate (4).
12
4
Fig. 4: Connect the welder plug (9) to the power supply
socket.
The power supply must be 230 V~ ±10% 50/60 Hz.
Make sure that there is an effective earth connection and
observe the relevant standards.
It is forbidden to tamper with the power
lead and the plug.
MAINTENANCE AND USE MANUAL
EN
QUASAR/QUASAR PLUS