Routine Maintenance - Zhermack QUASAR Manual Del Usuario

MAINTENANCE AND USE MANUAL
the machine exterior can normally be kept clean just by wiping it with a dry cloth. If necessary, wet the
cloth just a little water or use a non-degreasing detergent.
The operator must ensure that the machine is kept clean and free from any foreign bodies such as
dirt, water, non-conducting liquids etc.
the machine must be cleaned at the end of every work session to remove all residues. Cleaning must
be done with the machine at standstill and positioned in a stable manner.
Before cleaning the machine exterior always turn the main switch to OFF. It is strictly
forbidden to clean the machine while it is connected to the mains power supply.
Never use inflammable, corrosive, alkaline or toxic liquids when cleaning the machine.
Eye goggles and a face mask must be worn when using compressed air for cleaning
purposes. Do not allow any persons near the machine as they could be hit by flying
dust.
once the machine has been cleaned (see section 9.1) the operator must check for worn,
damaged or loose parts. If any such anomalies are discovered contact your Authorised Servicing
Centre.
Should any of the above anomalies be discovered it is strictly forbidden to restart the
machine before such faults have been set right.
More precisely, should the operator note any defects or problems of any kind whatsoever he/she must
place a warning sign on the machine indicating that maintenance work is in progress and that using the
machine is forbidden (EC-compliant signs can be purchased from the relevant suppliers).
routine maintenance, cleaning and proper machine use are essential factors in guaranteeing long-
lasting machine performance and safety.
Never use a naked flame to see what you are doing during checks or
maintenance operations.
Machine safety devices/guards must never be removed except for repair and
maintenance purposes.
Such items must be replaced as soon as the situation which led to their removal no
longer exists and in any case before the machine is used again.
QUASAR/QUASAR PLUS
EN
CHAPTER 9: MAINTENANCE
CLEANING

ROUTINE MAINTENANCE

9.1
9.2
141 of 296