Sanyo POA-WL11 Operación Manual página 47

Chapter 4. Setting up Wireless Imager
4. When the configuration is completed, press SELECT button, and the changed settings will be active.
[NOTE] If you close the menu by MENU button before pressing [SELECT], the changed
settings cannot be activated.
If you set the configuration of LAN1 ~ LAN3, the last configured LAN setting will be
activated. For example, if you configured LAN1 settings last, Wireless Imager starts
up with LAN1 settings.
You cannot set WEP encryption for wireless configuration from the projector menu. If
WEP setting is required, use web browser configuration method (refer to [4.3. Setting
up with the Browser] in chapter 4).
If you set SSID/ESSID by a PC, do not put blank space following letters. Wireless
Imager regards blank space as "no character", which may result in communication
error.
— 47 —