Sanyo POA-WL11 Operación Manual página 51

2. One-Shot Capture
When selecting [One-shot Capture], the personal computer is then connected to Wireless Imager
marked in the "Connect to WI Host" dialog box temporarily.
In One-shot Capture mode, only the screen displayed on the personal computer at that time is
captured, and then transferred to Wireless Imager. After the screen images have been transferred,
the connection to Wireless Imager is disconnected. However, the projector continues to project the
screen transferred in the One-Shot Capture mode.
The icon in the system tray is changed to the connecting icon during one-shot capture, and then
changed to the disconnecting icon.
Disconnected
[NOTE] When "Real Time Capture" and "One-Shot Capture" cannot be conducted successfully,
exit WI Client by selecting [Quit] and restart the WI Client.
3. Disconnect
To abort the image transfer in the Real Time Capture mode, select [Disconnect] in the menu.
[NOTE] When Disconnect is selected from the menu, the projector will keep displaying the image
just before disconnecting.
4. Connect
When clicking [Connect...], the "Connect to Wireless Imager Host" screen will appear.
If Wireless Imager you wish to connect is not displayed in "Target List", click the [Search] button.
When the Wireless Imager you wish to connect is displayed, select it from "Target List", select a
desired connection method, [Real Time Capture] or [One-shot Capture], and then click the [Connect]
button.
[NOTE] It is not possible to select and connect to multiple Wireless Imager.
The personal computer is then connected to the Wireless Imager under selected conditions to
transfer the screen.
Chapter 5.
Connected
— 51 —
Operating the WI Client
Disconnected