Sanyo POA-WL11 Operación Manual página 59

Image Adjustment
You can adjust the projector's image settings.
Select a desired mode from [Image Adjustment Mode] pull-down list, and click [Set] (or
[Change]) button. You can use either
numerical value in the text box, and click [Set] button.
The values shown next to each parameter are current settings and status.
You can store your manually configured image mode in [Image 1] through [Image 4].
To store the adjustment settings, go to the bottom of the screen to [Store Adjustment]. Select
the Image number that you want to save from the pull-down list, and click [Save] button. To
restore the original settings, click [Return].
[NOTE] Be sure to use single-byte characters for the text box field.
The Sharpness setting is between 0 and 31. Gamma setting is between 0 and
15. All other settings are between 0 and 63.
Parameter
Image Adjustment Mode
Adjustment items
Comment
* Displayed when WI (or Computer 1) is selected as the Input source.
** Displayed when Video is selected as the Input source.
[NOTE] Since configuration parameters vary depending on the projector model, the contents
mentioned above may be different from the actual configuration. For details, refer to
Owner's Manual of each projector.
Select from Standard, Real*, Cinema**, Image 1 – 4, from the pull-down
list.
Image 1 through 4 is set manually.
You can adjust Contrast, Brightness, Tint**, Color**, White Balance,
Sharpness**, Gamma, Noise Reduction**, Progressive**
You can store any comments regarding the Image Adjustment settings.
To save the comments you entered, click [Save] button.
— 59 —
Chapter 5. Operating the WI Client
or button to change the value, or enter a
Description