Sanyo POA-WL11 Operación Manual página 60

Chapter 5. Operating the WI Client
Screen
You can select a screen mode for the projector.
[NOTE] If "1080i", 1035i", or "720p" scan mode is selected from [System Adjustment] (Y,
Parameter
Aspect
True*
Digital Zoom*
* Displayed when WI or Computer1 is selected as the input source.
Sound
You can adjust the projector's volume.
The values shown next to each parameter are current settings and status.
[NOTE] Be sure to use single-byte characters for the text box field.
Parameter
Volume
Mute
[NOTE] Since configuration parameters vary depending on the projector model, the contents
mentioned above may be different from the actual configuration. For details, refer to
Owner's Manual of each projector.
Pb/Cb, Pr/Cr input only) setting in [SYSTEM] screen, you cannot configure
[Screen] settings.
Select either Normal or Wide mode by clicking on the radio button, and
click [Set].
Click either ON or OFF button to switch the screen projection.
Click [+], [–], or [Center] button to enlarge or minimize the screen, or [OFF]
to set no zoom.
The volume setting is between 0 and 63.
Click / button or enter a value in the text box to change the volume
setting, and click [Set].
Click [ON] or [OFF] button to turn Mute feature on or off.
— 60 —
Description
Description