Tool it PBT 60 Manual De Instrucciones página 14

PBT 600 – Battery Conductance Testeur
4. Press UP/DOWN key to modify the hour. Press confirm key to enter the minute adjustment.
5. Press UP/DOWN key to modify the minute. Press confirm key till OK displayed.
6. After adjustment, tester will return to the startup interface.
7.
During time adjustment, time number will flash, long press the key to increase or reduce the
number.
Note: During time adjustment, pressing of the UP, DOWN or CONFIRM key has to be over 1
second to avoid operation by mistake.
To modify the number, long press the UP/DOWN key, the number will automatically
and continuously increase or reduce.
NOTE: In date and time setting, return key is invalid in consideration of protecting
system time. Complete setting of "YMDHM" has to be done.If no need to set,
directly press OK key for 5 times to return.
13.10 Set User Information
This option is to set information on maintenance station code, telephone, address,
website, etc. Presently, it supports only English letter and number input. Maximum 8 lines
are allowed and each line 21 characters including Enter character.
If choose enter character, input in another new line.
For each character setting, it is space by default.
Suppose to end the input halfway, continuously press the OK key for 4 times to
complete the setting.
After successful setup, it shows "OK" for 2 seconds, then return to the previous
interface.
If need to reinput the user information, press OK key to open the information inputted
last time, long press MENU key to delete old information and reinput.
UK - 14