TECHNICAL TROUBLESHOOTING GUIDE
PROBLEMS
The kneading paddle
is stuck in the pan.
After pressing on ,
nothing happens.
After pressing on ,
the motor is on but no
kneading takes place.
After a delayed start,
the bread has not risen
enough or nothing
happens.
Burnt smell.
WARRANTY
• This appliance is designed only for household
use; the manufacturer shall accept no
liability in the event of any use that does
not comply with the instructions and the
warranty shall be invalidated.
ENVIRONMENT
• In accordance with applicable regulations,
before disposing of your appliance that has
reached the end of its life-cycle, make sure
Watch a detailed video on shaping baguettes by downloading your instructions video
CAUSES - SOLUTIONS
• Let it soak before removing it.
• EO1 is displayed and flashes on the screen, the appliance beeps:
the appliance is too hot . Wait 1 hour between 2 cycles.
• EOO is displayed and flashes on the screen, the appliance beeps:
the appliance is too cold. Wait for it to reach room temperature.
• HHH or EEE is displayed and flashes on the screen, the appliance
beeps: malfunction. The machine must be serviced by authorised
personnel.
• A delayed start has been programmed.
• The pan has not been correctly inserted.
• Kneading paddle missing or not installed properly.
In the two cases cited above, stop the appliance manually with a long
press on the button . Start the recipe again from the beginning.
• You forgot to press on after programming the delayed start
programme.
• The yeast has come into contact with salt and/or water.
• Kneading paddle missing.
• Some of the ingredients have fallen outside the pan: unplug the
appliance, let it cool down, then clean the inside with a damp
sponge and without any cleaning product.
• The preparation has overflowed: the quantity of ingredients used is
too great, notably liquid. Follow the proportions given in the recipe.
from the following websites:
www.moulinex.fr / www.moulinex.com
• Read the instructions for use carefully
before using your appliance for the first
time: Moulinex shall accept no liability in
the event of any use that does not comply
with the instructions.
it cannot be re-used by unplugging it and
cutting off the supply cord.
141