SunTech Tango+ Guia Del Usuario página 13

When the monitor is turned on, the Main Measurement View is displayed. This
screen displays the following elements while you take a measurement:
• Blood Pressure Result
• Double Product
per minute (SYS x HR/1000).
• %SpO : Displays the current percentage of oxygen saturation in arterial
2
blood.
• Heart Rate
• Waveform Display
(see View ► Waveform Display on page 17)
• Waveform Indicator
• Status Display
(see Measurement Setup ► Measurement Mode on page 16)
• Interval Indicator
(see Measurement Setup ► Interval on page 16)
• Timer : When Interval Indicator is set to MAN, displays how old the BP
measurement is. When set to a time interval, the timer displays the time until
next reading occurs.
• Cuff Pressure
: Displays latest or most current blood pressure.
: Displays the current workload on the heart in mmHg beats
: Displays current heart rate in beats per minute.
: Displays either the K-sound or the ECG signal
: Displays K for K-sound or E for ECG.
: Displays current measurement mode, BP or SYS
: Displays the interval mode the monitor is in
: Displays current pressure in the cuff.
13