SunTech Tango+ Guia Del Usuario página 25

b. As you take measurements with the Tango+, pay close attention to the
status display and waveform display. If the status display shows a status
message, consult the manual for Advice and Troubleshooting tips (page
30).
3. End Study.
a. When the stress test is over and you no longer need to take blood
pressures, press the SELECT key to display the main menu. Select END
TEST and YES to clear the display of the last measurement and prepare
the monitor for the next patient.
b. If you have the New Patient setting (under Main Menu ► View ► New
Patient; see page 17 for details) set to AUTO, Tango+ will automatically
prepare for a new patient once the ECG trigger signal is lost for 1
minute.
25