Cognex In-Sight VC200 Manual página 27

Connect USB Devices (Optional)
If connecting a USB mouse, keyboard or storage device to the vision controller,
connect the USB device to one of the vision controller's USB ports.
CAUTION: Cognex recommends only cold-plugging USB devices; turn the
vision controller power off when connecting or disconnecting USB devices.
Note:
When using the vision controller in an electrically noisy environment, it
l
is important to use USB devices that are rated for industrial use in the
same environment. Most commercially available USB devices are
rated for home use but are not designed for, or rated for, use in
industrial environments. The use of peripherals not fully rated for the
environment of use can result in impaired system immunity to nearby
electrical noise.
USB drives should be formatted with a FAT32 or NTFS file system.
l
26