Porsche Mobile Charger Connect Manual Del Propietário página 36

Operation
Inserting the control unit in the charg-
ing dock and removing it from the
charging dock
NOTICE
Damage to the charger
e
Always keep the door closed.
e
Do not place objects on the door or on the charg-
ing dock.
Inserting the control unit in the charging
dock
Fig. 19 Inserting control unit
1. Open the door of the charging dock.
2. Position the bottom of the control unit in the
locking lugs of the charging dock and engage by
pushing it to the rear.
34
3. Guide the vehicle cable through the opening
(Fig. 19) and wrap any excess cable around the
charging dock.
4. Insert the supply cable into the electrical socket.
5. Close the door of the charging dock.
Removing the control unit from the charg-
ing dock
Fig. 20 Inserting control unit
1. Open the door of the charging dock.
2. Disconnect the supply cable from the electrical
socket.
3. Unwind the vehicle cable fully from the charging
dock.
4. Detach the control unit from the mount by
pressing the release switch (arrow) and remove.
A