Safety During System Maintenance; Pump Identification; Technical Characteristics - Pratissoli KE Serie Manual De Uso Y Mantenimiento

9. The high pressure system must not be started up and run
under pressure without all team members in position and
without the Operator having already directed his/her lance
toward the work area.
3.5

Safety during system maintenance

1. High pressure system maintenance must be carried out
in the time intervals set by the manufacturer who is
responsible for the whole group according to law.
2. Maintenance should always be performed by trained and
authorised personnel.
3. Assembly and disassembly of the pump and the various
components must only be carried out by authorised
personnel, using appropriate equipment in order
to prevent damage to components, in particular to
connections.
4. Always only use original spare parts to ensure total
reliability and safety.
5

TECHNICAL CHARACTERISTICS

Model Rpm
KE 20 1450
KE 22 1450
KE 24 1450
KE 28H KE 28H-F 1450
KE 30H 1450
KE 36H 1450
4
Each pump has an identification label, see pos.  of Fig. 1
which shows:
- Pump model and version
- Serial number
- Max revs
- Absorbed power HP - kW
- Pressure bar - P.S.I.
- Flow rate l/min - Gpm
Flow rate
l/min Gpm
30 7.9
37 9.8
45 11.9
61 16.1
70 18.5
100 26.4
21

PUMP IDENTIFICATION

Model, version and serial number must always be
indicated when ordering spare parts
Pressure
bar psi
300 4350 18.4
250 3620 18.4
210 3050 18.4
150 2170 18.4
130 1885 18.4
100 1450 18.4
Fig. 1
Power
kW HP
25
25
25
25
25
25