Grundfos CRK Serie Instrucciones De Instalación Y Funcionamiento página 332

These Directives and standards apply until and including 19th April
2016:
– Machinery Directive (2006/42/EC).
Standard used:
EN 809:1998 + A1:2009.
– EMC Directive (2004/108/EC).
– Ecodesign Directive (2009/125/EC).
Electric motors:
Commission Regulation No 640/2009.
Applies only to three-phase Grundfos motors marked IE2 or IE3.
See motor nameplate.
Standard used EN 60034-30:2009.
– Ecodesign Directive (2009/125/EC).
Water pumps:
Commission Regulation No 547/2012.
Applies only to water pumps marked with the minimum efficiency
index MEI. See pump nameplate.
332
These Directives and standards apply from 20th April 2016 and
onwards:
– Machinery Directive (2006/42/EC).
Standard used:
EN 809:1998 + A1:2009
– EMC Directive (2014/30/EU).
– Ecodesign Directive (2009/125/EC).
Electric motors:
Commission Regulation No 640/2009.
Applies only to three-phase Grundfos motors marked IE2 or IE3.
See motor nameplate.
Standard used EN 60034-30:2009.
– Ecodesign Directive (2009/125/EC).
Water pumps:
Commission Regulation No 547/2012.
Applies only to water pumps marked with the minimum efficiency
index MEI. See pump nameplate.
This EC/EU declaration of conformity is only valid when published as
part of the Grundfos installation and operating instructions
(publication number 98476088 0316).
Székesfehérvár, 3 February 2016
Róbert Kis
Engineering Manager
GRUNDFOS Holding A/S
Poul Due Jensens Vej 7
8850 Bjerringbro, Denmark
Person authorised to compile the technical file and
empowered to sign the EC/EU declaration of conformity.