Display Modes - Grundfos Conex DIA-2Q Manual De Instrucciones

The translations for the words "setup" and
"language" into the currently available languages
are:
Deutsch
Hauptmenü Grundeinstellung
English
main menu setup
Français
Menu principal Paramétrage
Nederlands
hoofdmenu basisinstelling
Español
Menu principal Ajuste básico
Italiano
Menu principale programm. fond.
Português
Menu principal Posição inicial
Pусский
главное меню станд. настройка
Polski
manu główne ustawienia
chlorine
0.43 mg/l
• After selecting and confirming the operating
language by pressing [OK] during initial
commissioning, the display shows "chlorine" as
the value to be measured.
– On subsequent start-ups, the display will show
the measured value selected the previous
time.
chlorine
0.43
mg/l
Sprache
language
Langue
taal
Idioma
lingua
Língua
язык
język
c
5.20 pH
22 °C
c
• On upward or downward violation of the selected
measuring range, the display will show the upper
or lower limit and flash.
See sections 8.4 Measuring ranges
11.5.4 Setting the measuring ranges for chlorine,
chlorine dioxide, ozone, peroxide, peracetic acid,
pH, redox.

11.2.1 Display modes

Switching between display modes 1 and 2:
1. Use the [Up] and [Down] buttons to switch
between the two display modes:
Display mode 1 with two parameters
ClO
2
0.30
mg/l
4.00
pH
The large display shows the measured values for the
two parameters (for example ClO
inverted font in the header displays the two
parameters left-justified and right-justified.
The measured value for the left-justified parameter 1
is displayed in the first line, and the measured value
for the right-justified parameter 2 is displayed in the
second line underneath the header. The measured
value for a possibly active temperature
measurement is not output in this display mode.
Display mode 2 with two parameters
ClO
2
0.30
mg/l
pH
4.00
100.0
°C
The large display shows the measured values for
parameter 1, and the small display shows the
measured values for parameter 2 and the possibly
active temperature measurement. "c" is displayed if
the compensation functions are active.
and
pH
and pH). The
2
pH
c
c
27