Displaying The Operating Parameters; Turning Off The Sauna - Jacuzzi Mood S Manual De Uso Y Mantenimiento

Ocultar thumbs Ver también para Mood S:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 93
Displaying
the operating
parameters
The set values are displayed to
the left, whereas those measured
by the sensors are displayed
to the right of the display
Turning off
the sauna
We also recommend keeping the
sauna door slightly open to help
eliminate the residual humidity
You can check both the set temperature as well as the temperature reached in the
sauna; in bio sauna models, you can also check the relative humidity percentage (the
values refer to the sensor position).
During operation, hold down the
show the following configuration (the cloud will not appear for models without bio sauna).
4:27:15
20:51
The sauna ends when the set time has elapsed; you can also turn it off sooner by
pressing the
key.
The heater will remain hot for some time, even after switching the system off.
The light in the sauna will stay on for 30 minutes after the sauna was turned off; how-
ever you can turn it off sooner by pressing the
Drying the sauna room (models with bio sauna only)
When the bio sauna ends, the steamer is turned off but the heater is turned on in "dry"
mode (Finnish) in order to eliminate the residual humidity in the sauna; this function
lasts approx. 30 minutes, but can be turned off sooner by pressing the
40
control panel knob for a few seconds: the display will
key
(on the control panel).
4:23:14
impostato
misurato
75 °C
55 °C
50%
32%
20:51
key.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Mood mMood lMood xl

Tabla de contenido