Turn on the heater in bio sauna mode (see the relative chapter) and let the water boil for
approx. 10 minutes; then let it cool down.
Connect a pipe to the rubber holder situated under the steamer, use a container in
which to collect the dirty water.
Open the tap located above the rubber holder.
Rinse the steamer a couple of times, once you have finished the operation, close the
tap above the rubber holder and remove the pipe used to drain the water. Refill the stea-
mer with fresh water and re-position the cover.
If the appliance is equipped with a tank for automatic water filling, open the tap (R) loca-
ted between the tank and the steamer.
If the steamer has not been used for a long period of time, we recommend emptying it.
50