Status Strip - Blackmagic Design Pocket Cinema Camera Manual De Instalación Y Operación

Settings
27
1 2 3 4
1. Recording Format 6. ISO Setting
2. F-Stop 7. Shutter Angle
3. Frame Rate 8. White Balance
4. SD/SSD Status 9. Battery Life Indicator
5. Timecode
Image Stabilizer
Pocket Cinema Camera, Cinema Camera EF and Production Camera 4K support the image stabilizer (IS)
feature found in many active lenses. Simply set the Stabilizer switch to ON to use it with your camera. If your
lens also features a Stabilizer Mode switch, set it to the appropriate mode for still shots or for movement.
When using battery power, the camera will only activate the image stabilizer while recording, as the lens
draws additional power from the camera to operate the image stabilizer. When external power is connected
to the camera, the image stabilizer will be active any time you set the lens stabilizer switch to ON.

Status Strip

Your chosen settings are always displayed on a status strip, which runs the length of the LCD, showing
a convenient summary of the camera's current settings.
Battery Life Indicator
When the remaining charge drops below 25% capacity, the status strip will show the battery status in
red to warn you that battery life is running low.
SD/SSD Activity Icons
5 6 7 8 9
The status strip displays important information showing the state of the inserted media.
Moving Dots
No SD/SSD
Ready
Rec
Rec flashing
Disk Full
Playback mode
Time
When you see the moving dots, the camera is checking and preparing the media.
This means no media is detected or present in the camera.
Ready to Record.
Recording.
Dropped Frames were detected.
Flashes when SD card or SSD is almost full.
Displays play, fast forward and reverse icons.
Displays the duration of the current shot while recording. When playing back
clips from an SD card or SSD, this shows the time of the clip.