Ddress Of The Anufacturer; Ymbols And 1.4.1 Symbols; S Ymbols And T Erms; Se Nd Onservation Of These Perating And Aintenance Anual - BM2 BIEMMEDUE M130 Manual Del Usuario

they delivered or under delivery.
The conditions in this section exclude any previous explicit or implicit condition.
1.2 a
DDress of the
The address of the manufacturer of the high pressure cleaner is given in the declaration of conform-
ity attached to this manual.
1.3 u a C
se nD onservatIon of these
The operating and maintenance instructions are an integral part of the water cleaner and they must
be kept in a safe place for future reference so that they may be readily consulted in case of need.
The operating and maintenance instructions contain important information for the safety of the
operator and of any people near him and for the protection of the environment.
In case of deterioration or loss, a new copy should be requested from the dealer or from an au-
thorised service centre.
If the water cleaner is passed on to a third party, please make sure these operating and maintenance
instructions are also given to the new owner.
We take great care when drawing up our instructions. If you note any mistakes, please do inform
the Manufacturer or an authorised service centre.
The Manufacturer reserves the right to modify, update and correct these instructions without notice.
It is illegal to copy these instructions, even partially, without prior authorisation by the Manufacturer.
1.4 s t
ymbols anD
1.4.1 Symbols
The symbol:
m
WARNING
next to certain parts of the text, is to indicate that there is the firm possibility of injury to persons
if the relative instructions and indications are not followed.
The symbol:
CAUTION
next to certain parts of the text is to indicate that there is the possibility of damaging the water
cleaner if the relative instructions are not followed.
1.4.2 Terms
• Skilled Technician: a person, generally from the service centre, who has received appropriate
training and is authorised to carry out special maintenance and repairs on the water cleaner. Any
work on is electrical parts must be carried out by a Skilled Technician who is also a Qualified
Eletrician, i.e. a person with professional training who is authorised to check, install and repair
electrical equipment correctly and according to current regulations in the country where the
water cleaner is installed.
• Total Stop: this stops operation of the water cleaner every time the control lever on the cleaner
gun is released.
• Easy Start: this aids starting up the water cleaner by lowering the pressure for the first moments
of its operation.
m
anufaCturer
o
erms
m
peratInG anD aIntenanCe
m
anual
25