Afety Evices; Ntended Se; Removing The Appliance From Its Packing Materials - BM2 BIEMMEDUE M130 Manual Del Usuario

2.2 s D
afety evICes
This water cleaner is provided with the following safety devices:
a) Thermal protector
It's a device that stops the water cleaner operation in case of motor overheating.
In this case, proceed as follows:
- switch the main switch (2) to position "0" and remove the plug from the power outlet;
- press the lever (26) on the cleaner gun to eliminate any remaining pressure;
- wait 10 to 15 minutes until the water cleaner cools down;
- check that the instructions in the
TRICITY SUPPLY"
used;
- replace the electric plug in the power outlet and repeat the start-up procedure described in
the "
OPERATION
m
WARNING
• If this safety device cuts in repeatedly, do not use the water cleaner until it has been checked
by a Skilled Technician.
b) Pressure limit/adjustment valve
When this valve has been correctly set, the pumped fluid is able to return to the pump's suc-
tion unit, thus preventing the creation of dangerous levels of pressure when the cleaner gun is
stopped or should pressure be set that is above allowed levels.
c) Safety stop on cleaner gun lever
This is a safety catch (25) which, when pressed, lets you block the lever (26) on the cleaner
gun (14) to prevent the possibility of it being started by accident (see also Fig. 4, pos. S)
2.3 I u
ntenDeD se
m
WARNING
• This water cleaner is to be used exclusively for:
- cleaning vehicles, machinery, buildings, tools etc with cold water, possibly with the addition
of detergents as per the Manufacturer's instructions;
- distributing detergents as per the Manufacturer's instructions;
- removing lime scale and unblocking pipe work using the appropriate tools as per the
Manufacturer's instructions;
- water sanding objects using the appropriate tools as per the Manufacturer's instructions;
• The water cleaner must not be used to wash people, animals, energized electrical appliances,
delicate objects or the high pressure cleaner itself.
• The high pressure cleaner is not suitable for use in certain situations such as in corrosive or
explosive atmospheres.
• Contact the Manufacturer's service centre before use on board vehicles, ships or airplanes,
as there may be additional instructions for use.
Any other use is considered improper.
The Manufacturer is not liable for any damage caused by improper or incorrect use.
3 r t
emovInG he
m
WARNING
• Protective gloves and glasses must be worn when removing the appliance from the packing
materials to prevent injury to the hands and eyes.
"CHECKS AND CONNECTION TO THE MAINS ELEC-
section have been followed, particularly regarding any extension cord
" section.
a f
pplIanCe rom
I p m
ts aCkInG aterIals
27