ENGLISH
NUMBERING IN FIGURES
1. Alignment reference line
2. Socket
3. Knee centre reference
4. Front link
5. Balance unit
6. Pivot axis (alignment axis)
7. Housing
8. Back link
9. Bottom link
10. Chassis
11. Bumper
12. Shim
13. Extension promoter
14. Spring cup
15. Spring
16. Ferrule
17. Cable
18. Retaining Ring
19. Spring cup seat
20. Knee cap – small
21. Knee cap – large
22. Shin ferrule
23. Bearings (lubrication points)
24. Release points
FUNCTIONS AND BENEFITS
• Increased knee stability
• Increased toe clearance in swing phase
• Lightweight design
• 160° knee flexion – suitable for sitting, kneeling, cycling and other
activities where greater knee flexion is desired
• 24-month warranty
INDICATIONS FOR USE
• Junior amputee up to 45kg (100lbs) patient weight
• The Total Knee is exclusively used for lower limb prosthetic fittings
CLEARANCE (Figure 1)
ALIGNMENT AND ADJUSTMENT (Figure 2)
ADAPTER OPTIONS (Figure 3)
• 4- prong socket adapter (AJ-114040).
• Pediatric 4-hole adapter (AJ-122300) (1155).
• Pediatric pyramid adapter (AJ-834300) (1125).
Important: Always use original Total Knee/Össur adapters. Fully engage
threads. Align pinch bolt 90° anteriorly for male pyramid, prong adapters
and Euro 4-hole adapter (Figure 3). Threads are cut for maximum
strength in this position.
5