Össur TOTAL KNEE JUNIOR Instrucciones Para El Uso página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 25
NOTE: If no shims are used, the knee will exhibit some flexion/extension
play during stance. If the patient finds this motion unacceptable, this can
be reduced by adding shims.
EXTENSION PROMOTER (Figure 7)
The extension promoter (13) reduces excessive heel rise and promotes
faster knee extension. It is set at minimum when shipped from Össur.
• Flex the knee to access the extension promoter adjustment screw.
• To reduce excessive heel rise, especially when walking fast, turn the
extension promoter adjustment screw clockwise with a large flathead
screwdriver.
EXTENSION ASSIST (Figure 9)
The extension assist is an OPTIONAL feature that helps get the knee
back to full extension. We recommend use of the extension assist only
when the amputee is unable to extend the knee to engage the geometric
lock.
• Beneficial for users having difficulty achieving full extension.
• Can help during fast walking.
• Brings knee to full extension consistently.
• Places positive locking bias on Geometric Lock to enhance stability.
Available with two different springs (yellow=regular, blue=firm).
INSTALLATION (Figure 9)
• Remove bumper and shims (Figure 7)
• Install spring cup (14) into hole inside 30mm tube clamp of knee (19)
• Firmly seat spring cup by gently tapping with rubber mallet
• Place ferrule (16) over cable (17)
• Place spring (15) over cable (17) and ferrule (16) (start with the yellow
spring)
• Insert cable (17) and spring (15) into spring cup (14), ball end of cable
first
• Slide ball end of cable through hole in knee (19) and insert ball into
the slot on bottom link (9) using small screwdriver or needle nose
pliers.
• Reinstall the selected shims (12) and bumper( 11).
FOLLOW-UP CHECK
• Reassess adjustments after a couple of weeks
• It may be necessary to change shim and bumper adjustments after
user has gained some experience with the knee
• Increased experience, security and voluntary control may require
change to a harder bumper and/or increased shim thickness.
COSMETIC OPTIONS (Figure 8)
We recommend a discontinuous cosmetic solution which does not
interfere with knee function. Continuous cosmetic solutions are also
possible.
8

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

1100

Tabla de contenido